C & C Technologies
Integrated with a Hugin AUV, the ULS-500 deep-rated system was deployed by C & C Technologies in the Gulf of Mexico for pipeline survey operations. Accurate alignment between the concrete mats and the pipeline as well as an accurate understanding of pipeline free span was able to be understood from this data. Read More
As part of a major North Sea installation contract, Subsea 7 used 2G Robotics’ ULS-500 high precision underwater laser scanning system for a hybrid LBL/laser scanning solution to perform subsea spool metrology.
Ocean Atlantic Petroleum
The ULS-200 was deployed inside an FPSO I-tube using a spring actuated pipe centralizer. The company’s objective was to obtain as-built geometry of the I-tube in order to ensure unobstructed installation of a power umbilical through the I-tube. Read More
OceanUS used the ULS-100 underwater laser scanner to obtain accurate and detailed information about the condition of offshore jackets. Based on the accurate 3D scans and the resulting engineering drawings, bracing for the jackets was fabricated and installed, which extended the service life of the offshore jackets. Read More
Nautic Middle East
Nautic Middle East deployed the ULS-100 underwater laser scanner using a customized Inuktun crawler to obtain detailed 3D models of a buckled pipe in order to accurately repair the damaged area. Read More
Fugro Survey needed to design and fabricate tie-in spools to connect flanges on a tree to flanges on a template. In order to design the tie-in spools, Fugro used the ULS-200 to obtain measurements of the relative position and orientation of the flanges. Read More
City of Bellingham
The City of Bellingham utilized the ULS-200 underwater laser scanner to obtain a detailed understanding of their water tunnel’s current condition. At fixed intervals, the cross-section of the raw water intake tunnel was assessed and millimeter-level variations at set points along the tunnel length were identified for further investigation to determine if any repairs were required. Read More
Lotowater Technical Services deployed the ULS-100 underwater laser scanner in a potable water well that was undergoing modifications. The ULS-100 provided accurate diameter measurements of an abandoned pipe inside the well which allowed for the pipe to be effectively extracted through the well liner. Read More
National Oceanic and Atmospheric Administration (NOAA)
The National Oceanic and Atmospheric Administration (NOAA) used the ULS-500 to explore the Monohansett shipwreck site at the Thunder Bay National Marine Sanctuary. The ULS 500 captured detailed 3D models of the Monohansett at a range of approximately 3m to 5m. Read More
Parks Canada used the ULS-500 to explore the HMS Investigator shipwreck and HMS Erebus shipwreck in order to obtain detailed 3D archaeological records on the wrecks in their current condition.
Research and Education
HR Wallingford, a world-leading independent civil engineering and environmental hydraulics organization, purchased a ULS-200 to facilitate with the accuracy and efficiency of their marine renewables projects and scour research. Read More
New York University
The Department of Math & Atmospheric Ocean Science at New York University used the ULS-100 underwater laser scanner to scan a sheet of ice inside of a flume tank in order to examine Ice Scallop formations and melt rates.